The Notifier FST-951R-IV Series intelligent thermal detectors are designed for both performance and aesthetics and are direct replacements for the FST-851 Series. A new modern, sleek, contemporary design and advanced thermal technologies make the FST-951R-IV Series ideal for both system operation and building design. The point ID address set using rotary decimal switches, provide specific detector locations.
The Notifier FST-951R-IV Series plug-in intelligent thermal detectors use a detachable base to simplify installation, service, and maintenance.
The Notifier FST-951R is an intelligent, addressable rate-of-rise heat detector design to provide reliable thermal detection in various commercial and industrial applications. Featuring a modern, low-profile design, it integrates advance thermal technologies to ensure prompt and accurate response to rapid temperature increases. The Notifier FST-951R Series intelligent thermal detectors are design for both performance and aesthetics, and are direct replacements for the FST-851 Series. A new modern, sleek, contemporary design and advanced thermal technologies make the FST-951 Series ideal for both system operation and building design. The point ID address, set using rotary decimal switches, provide specific detector locations.
The Notifier FSP-951T-IV is an addressable smoke and thermal detector that combines photoelectric smoke detection with thermal temperature monitoring. This advanced device helps provide precise fire detection in various environments. By using both smoke and heat sensing technologies, it offers early warning of potential fires. As a result, it is ideal for commercial and industrial applications.
Photoelectric Smoke Detection: The FSP-951T-IV uses light-scattering technology to detect smoke particles. This method excels in identifying smoldering fires, which produce significant smoke with minimal heat. Consequently, it provides early detection before visible flames appear.
Thermal Sensing: This detector includes a thermal sensor that detects temperature increases. It helps the FSP-951T-IV recognize fires even before smoke becomes visible, offering a quicker response time.
The Notifier FSP-951T Series detector sensitivity can be program in the control panel software. Sensitivity is continuously monitor and report to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both FlashScan® and CLIP applications as designate.
By combining photoelectric and thermal sensing technologies, the FSP-951T offers superior detection accuracy. The photoelectric sensor detects smoke particles from slow-burning fires, while the built-in heat sensor activates when temperatures exceed a fixed threshold. This dual functionality ensures a faster and more reliable response in a wider range of fire conditions.
The NOTIFIER FSP-951-BP (bulk pack) Series intelligent plug-in smoke detectors are design for both performance and aesthetics, and are direct replacements for the FSP-851 Series. A new modern, sleek, contemporary design and enhance optical sensing chamber is engineer to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards.
The FSP-951-BP Series detector sensitivity can be program in the control panel software. Sensitivity is continuously monitor and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both FlashScan and CLIP applications as designate.
The Notifier FPTI-951 is an intelligent plug in addressable multicriteria detectors for Notifier SLC loops using FlashScan or CLIP protocol. This detector reduces false alarms and is more effective at detecting fires with its three sensors: photoelectric sensor to detect smoke, thermal sensor to detect heat and rate of rise 135F and infrared sensor (PTIR). It replaces the FAPT-851 series.
Notifier FHS Firefighter Handset: Reliable Emergency Communication
The Notifier FHS Firefighter Handset is a vital communication tool designed for emergency responders within buildings equipped with Notifier fire alarm systems. This handset ensures clear and direct voice communication during fire events, enhancing firefighter coordination and safety.
Advantages
Reliable Emergency Communication – Provides instant and direct voice contact with emergency personnel.
Durable and Long-Lasting – Built for heavy-duty use in critical environments.
Seamless System Integration – Fully compatible with Notifier firefighter telephone systems.
Compact and Portable – Designed for quick and easy deployment.
Clear and Secure Audio Transmission – This ensures uninterrupted communication during fire incidents.
The Notifier DS-SFM fiber module option module converts one of the two digital audio ports on a DAA2, DAX, DS-DB or DVC. That mounts fiber option modules (DVC-EMPCC version or later) from wire to fiber. One or two fiber option modules may be installed, converting the DAA2, DAX, DS-DB or DVC partially or wholly to fiber optic communication. A DAL (digital audio loop) can support wire, single-mode fiber, and multi-mode fiber on the same loop with fiber option modules. The Notifier DS-SFM Fiber module for single mode fiber. Allows fiber digital audio loop segments between any digital audio loop devices.
The Notifier DR-D4B Blank Door offers a robust and versatile solution for various access control and security needs. This blank door seamlessly integrates with Notifier systems, providing a reliable and adaptable component to enhance the security infrastructure of any facility.
Key Features
High-Quality Construction: Crafted from durable materials, the Notifier DR-D4B Blank Door withstands harsh environments and heavy usage, ensuring long-term reliability.
Seamless Integration: This blank door fully integrates with Notifier’s range of fire and security systems, allowing for easy system enhancements.
Versatility: Suitable for a wide range of applications, the blank door can be customized to fit specific security and access control requirements.
Easy Installation: The DR-D4B design facilitates straightforward installation, making it practical for both new installations and system upgrades.
The Notifier DR-D4 is a four-tier door assembly designed for use with Notifier's CAB-4 Series cabinets, providing a secure and professional enclosure for fire alarm control systems. It ensures easy access to system components while maintaining protection and durability in commercial and industrial environments.
The DR-D4 door assembly is an essential component for protecting and securing fire alarm control equipment, offering convenient access and a professional appearance for commercial and industrial fire alarm systems. All cabinets for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel. The cabinet assembly consists of two basic parts: a backbox and a locking door. Cabinets are available in either black or red, with or without windows. The window model provides a tasteful combination to accent the decor of the finest lobby setting.
(THIS IS THE NOTIFIER DR-B4B "B TIER")
The Notifier DR-B4 Door Assembly is Two Tiers, “B” Size CAB-4 Series Cabinet for NOTIFIER Fire Alarm control panels. This cabinets are fabricated from 16-gauge steel. The cabinet assembly consists of two basic parts: a back box and a locking door. Also, Cabinets are available in either black or red, with or without windows. The window model provides a tasteful combination to accent the decor of the finest lobby setting.
The Notifier DR-B4 Door Assembly is Two Tiers, “B” Size CAB-4 Series Cabinet for NOTIFIER Fire Alarm control panels. This cabinets are fabricated from 16-gauge steel. The cabinet assembly consists of two basic parts: a back box and a locking door. Cabinets are available in either black or red, with or without windows. The Notifier DR-B4 Door Assembly has Right- or left-hand hinges and are selectable in the field. The door opens 180.° Cabinets can arrange in four standard sizes, A (one tier) through D (four tiers), plus a mini cabinet (AA, one tier without a battery compartment). A trim ring option is available for semi-flush mounting. Chassis bridge available for assembling multiple CHS-4 chassis external to the backbox.
