The Notifier NH-200R Fixed Temperature Heat Detector is designed to provide dependable heat detection in various environments. Utilizing advanced fixed temperature sensing technology, this detector ensures prompt and accurate response to high temperatures, enhancing fire safety and protection measures. The NH-200R is a low-profile intelligent rate-of-rise thermal heat detector (15F (8.3C) per minute) for use with Notifier Fire Warden addressable fire control panels using FlashScan protocol. The Notifier NH-200R comes with a B-300-6 detector base included. It uses rotary decimal switches for device addressing (Point ID) and supports remote test from the panel. It replaces the legacy NH-100R Series.
The Gamewell ATD-L3R-IV Remote Test Heat Detector is a Velociti Series 3 intelligent addressable thermal detector that provides 135°F (57°C) fixed-temperature and rate-of-rise heat detection, and it supports both Velociti and CLIP protocol on the SLC loop for legacy installations. It uses rotary address switches for point ID location (01–159), dual LEDs for 360° visibility, and a built-in functional test switch activated by an external magnet.
The Notifier NFS-320-SP Fire Alarm Control Panel is the Spanish version engineered specifically for small applications. Its features minimize installation time, enable faster response times and simplify maintenance and usability. The NFS-320 offers all the sophistication and performance synonymous with the ONYX Series, but on a smaller scale. One isolated intelligent signal circuit, up to 159 detectors and 10 independent releasing zones. Contact: Control Fire Systems An Authorized Notifier Engineered Systems Distributor (ESD)
The Notifier NFS-320-RB-SP Replacement CPU is a replacement main board/CPU for the Notifier NFS-320 intelligent fire alarm control panel, featuring a Spanish keypad and 120 VAC operation. It serves as the core processing unit for the system, supporting 318 devices (159 detectors and 159 modules).
Notifier NFC-LOC First Command Local Operator Console
The Notifier NFC-LOC First Command Local Operator Console is compatible with the NFC-50/100(E) Emergency Voice Evacuation Panel for fire protection applications and mass notification. It is part of a family of external remote consoles that allows for extending the NFC-50/100(E) display and control to remote locations within a building. It consists of a complete operator interface that is identical to the NFC-50/ 100 main console as well as a built-in microphone with a Pushto-talk feature for ALL CALL paging.
It is house in a cabinet with a key to prevent unauthorize access. The local operator console requires an external data bus connection, an external audio riser connection, and an external operator interface power connection (24 Volts DC) from the NFC-50/100 main console. Typical application include places such as Schools, Nursing Homes, Factories, Military Facilities, etc.
The Notifier NFC-CE6 Circuit Expander Module is for the NFC-50/100E. The NFC-50/100 and NFC-50/100E are multipurpose emergency voice evacuation panels for fire applications, mass notification applications, or both. The First Command delivers 50 or 100 watts of audio power for distribution to up to eight speaker circuits .
The NFC-50/100(E) comes standard with a single speaker circuit and a built-in 50-watt, 25V amplifier. A secondary 50 watt amplifier (NFC-BDA-25/70V) can b e added for single speaker circuit backup. Or to increase system capacity to two speaker circuits and 50 watts of audio power.
The NOTIFIER NCA-2 Network Control Annunciator is a second-generation Network Control Annunciator for the NOTI•FIRE•NET network, compatible for use with ONYX® Series nodes such as the NFS2- 3030, NFS-3030, NFS-320, NFS-640 and NFS2-640 fire alarm control panels, as well as first-generation NCA Network Control Annunciators. Additionally, the NCA-2 may be configure with DVC Series products to create one or more Digital Audio Command Centers on NOTI•FIRE•NET. The NCA-2 provides system control and display capabilities for all, or for select network nodes.
The Notifier NC-100R Addressable Relay Module provides NOTIFIER’s FireWarden Series intelligent control panels with two isolated sets of Form-C dry-contact outputs for activating a variety of auxiliary devices, such as fans, dampers, door holders, control equipment, etc. Addressability allows the dry contact to be activated, either manually or through panel programming, on a select basis. Each NC-100R(A) uses one of the addresses on a SLC loop. It responds to regular polls from the control panel and reports its type and status.
Honeywell introduces Notifier NC-100 Addressable Control Modules which provides NOTIFIER’s FireWarden Series intelligent control panels a supervised Class B (Style Y) of Class A (Style Z) circuit for Notification Appliances (horns, strobes, etc.). Addressability allows the NC-100(A) to be activated, either manually or through panel programming, on a select (zone or area of coverage) basis.
The Notifier NBG-12WLSP Wireless Pull Station is a dual-action, manual pull station with a key-lock reset feature that provides one addressable alarm initiating input. The pull station features similar aesthetic design and durable construction characteristics as the wire counterpart to blend seamlessly throughout the environment. The device communicates to the Fire Alarm Control Panel (FACP) through the SWIFT mesh network and gateway, and is power by 4 batteries offering a 2-year, UL list battery life.
The Notifier NBG-12LXP Manual Dual-Pull Station (Portuguese) is a state-of-the-art, dual-action (requires two motions to activate the station) pull station that includes an addressable interface for any Notifier intelligent control panel except FireWarden series panels, and the NSP-25 panel. Because the NBG-12LXP is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm.
In general, the Notifier NBG-12LSP is a cost-effective, feature-packed series of non-coded manual fire alarm pull stations in Spanish. Also, it was designed to meet multiple applications with the installer and end-user in mind. Besides, the Notifier NBG-12LSP features a variety of models including single- and dual-action versions.
