Description

The Gamewell FCI AMM-4F Addressable Monitor Module features a single Style D, Class A initiating device circuit. It may also be configure as a Style B, Class B initiating circuit with end-of-line resistor. This module provides an address for any device or group of devices connected to this circuit. Any alarm initiating devices with normally open (N.O.) dry contacts, such as heat detectors, linear heat detection devices, 4-wire projected beam smoke detectors, 4-wire smoke detectors, water flow switches, tamper switches, manual stations, etc. may be install in this circuit.

The Gamewell FCI AMM-4F Addressable Monitor Module is design for installation in the signaling line circuit of any Gamewell-FCI analog addressable control panel. The initiating circuit of the AMM-4F has a maximum line resistance of 40 ohms, allowing the module to accommodate a number of initiating devices at a distance from the module. The AMM-4F is design to mount in a 4” square junction box 2 1/8” deep.

• Features / Specifications
  • Compact size allows easy installation
  • Includes Class A, Style D, or Class B, Style B initiating circuit
  • Offers a visual rotary, decimal switch addressing (01-159)
  • Provides a 40 ohm line resistance for each initiating device circuit
  •  Accommodates any N/O dry contact device
  • Bi-color LEDs flash green whenever the module is addressed, and light steady red on alarm
• Download the Specification sheet in *.pdf format