Description

The Gamewell FCI GWMS95-DL Dual Action Pull Station XP95 pull station that includes an XP95 addressable interface for any Gamewell-FCI 600 Series Fire Alarm Control Panel (FACP). Because the Gamewell FCI GWMS95-DL is addressable, the FACP can display the exact location of the activated manual station. This display leads fire personnel quickly to the location of the alarm.

Pushing in, then pulling down on the handle causes it to latch in the down/activated position. Once latched, the word “ACTIVATED” (appears in bright yellow) at the top of the handle, while a portion of the handle protrudes from the bottom of the station. To reset the station, simply unlock the station with the key and pull the door open. This action resets the handle; closing the door automatically resets the switch. Each manual station, on command from the control panel, sends data to the panel representing the state of the manual switch. The DIP switch is used to set addresses.

• Features / Specifications
  • Meets UL Standard 38, for manually actuated signaling boxes
  • Maintenance personnel can open the station without causing an alarm condition
  • Built- in bicolor LED, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm
  • Captive screw terminals wire-ready for easy connection to SLC loop (accepts up to 12 AWG/3.25 mm² wire)
  • Smooth dual-action design with key reset
  • Up to 126 stations per XP95 loop
• Download the Specification sheet in *.pdf format