Description

The Gamewell FCI GWPID-95 addressable Point Identification Device is the interface between the non-powered, normally-open, dry-contact devices. Also, it is designed to operate with the Gamewell-FCI’s 600 Series and ILI95-E3 Series® of analog addressable fire alarm control panels (FACPs). Point Identification Devices monitor a single Style B circuit, and they are design to be mount in an electrical backbox. Besides, the PID-95P can be surface or flush-mounted and it has a visible LED for alarm/ annunciation.

The Point Identification Device connects to the Signaling Line Circuit (SLC) via two wires. The Gamewell FCI GWPID-95 will monitor, via a two-wire supervised SLC circuit, contact-type devices such as a water flow switch or a manual station. Upon activation of the monitored device, the PID-95 will report its address to the 600 Series or ILI95-E3 Series FACP via the analog SLC. The fire alarm control panel will then activate into all alarm programmed outputs related to the PID-95.

To program the PID-95, set a single DIP switch on the device’s printed circuit board. Use the DIP switch to set the address of the device and the priority interrupt (DIP SW #8). To program the 600 Series or ILI95-Series, use the laptop computer to program or use the control panel Operator’s display.

• Features / Specifications
  • Compatible with the Gamewell-FCI, 600 Series and ILI95-E3 Series Systems
  • Includes an LED for alarm annunciation
  • Provides priority interrupt
  • Monitors dry-contact devices
  • Field programmable
  • Offers a plate-mounted version available for surface or flush mounting in the following dimensions: – 4″ x 4.688″ (10.16 cm x 11.908 cm) double- gang backbox – 4” x (10.16 cm) square backbox
• Download the Specification sheet in *.pdf format