Description

In general, the Honeywell HPF-PS6 and PS Series are a remote power supply line from Honeywell and is a direct replacement for the 5495/5499. Furthermore, the HPF-PS6, SK-PS6 are 6 amp and the HPF-PS10, SK-PS10 are 10 amp, remote power supplies with battery charger that may be connected to any 12 or 24 volt fire alarm control panel (FACP) or used as a standalone power supply. Besides the PS Series provides 24 VDC power for NACs (notification appliance circuits) configured as either Class B or Class A (requires the ZNAC-PS option card) with multiple sync protocol options.

The Honeywell PS Series also provides auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and other fire alarm system peripherals. Also the PS Series cabinet can hold two 7 AH or 18 AH batteries and can charge up to 33 AH batteries in a separate cabinet. Up to five (6 amp model) or seven (10 amp model) independently-configurable, power limited output circuits for: Class B and/or Class A NACs, Class B and/or Class A resettable or non resettable 24V auxiliary power-door holder power.

• Features / Specifications
  • 6 or 10 amp full load output, respectively, with 3 A maximum/circuit.
  • AC trouble report delay timer.
  • Completely configurable via onboard DIP switches, no extra software required.
  • Configurable for ANSI® Temporal 3 or Temporal 4 coded output.
  • Cabinet can house two 7 AH or 18 AH batteries.
  • Removable terminal blocks accommodate up to 12 AWG (3.1mm2) wire.
• Download the Specification sheet in *.pdf format