Description

The Silent Knight SK-PULL-DA is a dual action pull station requiring two motions to active the station. Also, the Silent Knight SK-PULL-DA are for use with Honeywell Silent Knight Series fire control panel (FACP). Extremely easy to operate, the SK-PULL-DA and SK-PULL-SA provide a fast as well as practical means of manually initiating a fire alarm signal. Besides, the FACP recognizes each manual pull station by its specific address saving precious seconds in determining the location of an alarm.

In general, the SK-PULL-SA and SK-PULL-DA can be surface mount to an SB-I/O surface back box or semi-flush mounted on a standard single-gang with a minimum depth of 2.13”(5.40 cm) or double gang or 4” (10.61 cm) square electrical box. You can also use the optional (System Sensor® PN BG-TR) trim ring if the station is being semi-flush mount.

• Features / Specifications
  • Installer can open station without causing an alarm condition
  • Dual-color LED is visible through handle of station blinks green to indicate normal operation and remains steady red in an alarm condition
  • Key operated test and reset lock using lock plate actuator
  • Meets ADA requirement for 5 lbs maximum pull force to active
  • Reliable analog communications for trouble-free operation
  • Rotary address switches for fast installation
  • Handle latches in down position and the word Activated appears, clearly indicating the station has been pulled
• Download the Specification sheet in *.pdf format