The Notifier N-ANN-S/PG Serial/Parallel Printer Interface Module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories. The N-ANN-S/PG and the FACP communicate over a two-wire serial interface employing the ANN-Bus communication format. An additional two wires are used for 24-volt DC power. A single four conductor unshielded cable may be used for both power and data communications. Up to eight devices may be connected to the ANN-Bus of each FACP.
The Notifier N-ANN-LED-W Annunciator Module and the N-ANN-80-W annunciator replicates general system faults and input zones/points when used with a compatible fire alarm control panel. The N-ANN-I/O is an LED driver module that can be used in a wide variety of applications including as an interface with the FACP to drive most customized graphic annunciators. The N-ANN-RLY relay module provides 10 programmable Form-C relays when used with the FACP.
The N-ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The N-ANN80 and the FACP communicate over a two-wire serial interface employing the ANN-Bus communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. The N-ANN-80 is black; for white order N-ANN-80-W.
The Farenhyt IDP-HEAT-IV Addressable Heat Detector Series intelligent thermal detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design and advanced thermal technologies make the Farenhyt IDP-HEAT-IV Series ideal for both system operation and building design. Ivory, low-profile intelligent 135°F fixed thermal sensor. Must be mount. The point ID address, set using rotary decimal switches, provide specific detector locations. The series includes a 135°F/57°C fixed temperature, rate-of-rise and a 190°F/88°C fixed high-temperature detectors. These thermal detectors provide effective, intelligent property protection in a variety of applications. These thermal detectors are for use with Honeywell Farenhyt series fire alarm control panels (FACPs).
The Farenhyt IDP-HEAT-W Addressable Heat Detector is a fixed temperature thermal detector that uses a thermistor sensing circuit to produce 135 F fixed thermal detection. These thermal detectors are for use with Honeywell Farenhyt series fire alarm control panels (FACPs).The point ID address, set using rotary decimal switches, provide specific detector locations. These thermal detectors provide effective, intelligent property protection in a variety of applications.
The new System Sensor P2GRKLED Wall Horn Strobe LED L-Series outdoor weatherproof devices offer significant improvements in current draw and power supply utilization compared to previous generation SpectrAlert Advance outdoor appliances. In addition, all L-Series outdoor notification appliances are NEMA 4X and IP56 rated without having to seal the backbox. Additional caulk and sealant are not required on the backbox allowing for a faster, cleaner installation. Plus, leveraging LED technology for the strobe devices improves design flexibility for notification appliance circuits (NACs) while also reducing power supply requirements, allowing for simpler and lower-cost installations.
The Honeywell MR-101/CR Control Relay is design to provide reliable control in fire alarm and security systems. This device offers dependable operation, enabling efficient management of various connect devices and enhancing the overall functionality of your safety systems. The Honeywell MR-101/CR features a single pole, double throw (SPDT) configuration, allowing it to manage both normally open and normally closed circuits. This versatility makes it suitable for a wide range of applications. This control relay operates on a range of voltage inputs, including 24V DC or 120V AC, making it adaptable to various system requirements. With a compact footprint, the MR-101/CR easily fits into standard electrical boxes, ensuring straightforward installation without taking up excessive space. Built with high-quality materials, this control relay is designed for long-lasting performance in demanding environments. Its reliable design ensures consistent operation, minimizing the risk of failure. The built-in LED indicator provides visual feedback on the relay’s status, making it easy to monitor operations and identify issues quickly.
The Honeywell LT-SEN-M Li-Ion Tamer Monitoring Sensor comprise on-board detection algorithms making them acutely sensitive to lithium-ion battery off-gassing compounds. They do not require calibration, are compatible with all forms of lithium-ion battery form factors and chemistries and have a lifetime comparable to a typical lithium-ion battery system. The Monitoring sensors are installed at the battery racks. Overall it detects electrolyte solvent vapors, is sensitive to single-cell failures, compatible with various Li-ion chemistries, and works with an interface module for system integration, providing crucial safety for battery racks.
The Notifier LCD-160-SP Display Annunciator(Spanish Version) is a 640-character Liquid Crystal Display (LCD) annunciator and remote control for the NOTIFIER NFS-3030 / NFS2-3030 Fire Alarm Control Panel (FACP). The LCD-160 will mimic the top portion (160 characters) of the NFS-3030/ NFS2-3030’s 640-character display. This provides the event and preprogram custom messages as display on the main panel. The full screen contains soft key functions, and can display other panel information.
The Notifier HS-NCM-SF Network Communications Module (HS-NCM) provides NOTIFIER’s NFS-320, NFS-640, NFS2-640, NFS-3030, and NFS2-3030 Fire Alarm Control Panels, NCA and NCA-2 Network Control Annunciators, and DVC Digital Voice Command with a means to connect to High-Speed NOTI•FIRE•NET (NFN). When not connect to a fire alarm panel, the HS-NCM defaults to repeater mode and can be use to boost signal distances or to pass data transmissions between two differently configure network segments when wire and fiber co-exist on a network.
Notifier HS-NCM-MF High Speed Network Communications Module
The Notifier HS-NCM-MF High-Speed Network Communications Module (HS-NCM) provides NOTIFIER’s NFS-320, NFS-640, NFS2-640, NFS-3030, and NFS2-3030 Fire Alarm Control Panels, NCA and NCA-2 Network Control Annunciators, and DVC Digital Voice Command with a means to connect to High-Speed NOTI•FIRE•NET (NFN).
Each Notifier HS-NCM-MF can accommodate up to two node addresses. For example, one HS-NCM can provide network communication for both an NFS2-640 and an NCA-2.
The Honeywell HON-CGW-MBB CLSS Gateway enables reading the connect device system inventory from one panel or a network of panels and transmitting this data to the Connect Life Safety Services (CLSS) Cloud. Also, The gateway board can be connect with the CLSS Cloud, a configuration computer, a panel, a mobile device, and an external power supply. Furthermore, The CLSS Gateway is a key component for optimizing CLSS functionality. Additionally, The CLSS Gateway can also be used as a Fire Alarm Communicator to central station. When its use with the optional cellular module and feature activation of course.
