Description

The Gamewell AMM-2IF Addressable Dual Monitor Module features two Style B, Class B initiating device circuits, each with an end-of-line resistor. Also, this module provides addresses for any device or group of devices connected to each circuit. Any alarm initiating devices with normally open (N.O.) dry contacts, such as heat detectors, 4-wire projected beam smoke detectors, 4-wire smoke detectors, water flow switches, tamper switches, manual stations, etc. may be install in these circuits.

Furthermore, the Velociti® Series use a communication protocol that substantially increases the speed of communication between the sensors and certain Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel’s microprocessor stops the group poll and concentrates on the single device. The net effect is response speed up to five times greater than earlier designs.

The Gamewell AMM-2IF module is design for installation in the signaling line circuit of any Gamewell-FCI addressable control panel. The AMM-2IF is design to mount in a 4” square junction box, 2 1/8” deep. The initiating device circuit of the AMM-2IF can support a maximum line resistance of up to 40 ohms allowing the use of linear heat detection devices.

• Features / Specifications
  • Supports Class B, Style B, initiating device circuits
  • Provides a visual rotary, decimal switch addressing (01-159)
  • Offers 40 ohm line resistance for each initiating circuit
  • Accommodates any normally open contact device
  • Displays bi-color LEDs flash green whenever the module is addressed, and light steady red on alarm*
  • Includes a compact size allows easy installation
• Download the Specification sheet in *.pdf format